Author (Read 156615 times)

loldudex2 · « **Reply #525 on:** February 08, 2012, 11:04:24 PM »

Quote from: Aaron on February 08, 2012, 10:58:40 PM

I acctually really like that design I think you should add some legs on it though and it is something different that I think will look pretty cool on a card

Thanks. My plan is this is half of the card, and I was going to mirror it onto the other half. Obviously this is no where near being finished, and I will be trying out different things.

Aaron · « **Reply #526 on:** February 08, 2012, 11:11:53 PM »

Quote from: loldudex2 on February 08, 2012, 11:04:24 PM

Quote from: Aaron on February 08, 2012, 10:58:40 PM
I acctually really like that design I think you should add some legs on it though and it is something different that I think will look pretty cool on a card

Thanks. My plan is this is half of the card, and I was going to mirror it onto the other half. Obviously this is no where near being finished, and I will be trying out different things.

Sweet I dont think you should mirror that king though I think it would look better just one of them and just standing there. Maybe even put in a easy grass design and I think that would look cool

Here is a picture of me A of Hearts non-3D and the stick king mirrored.

loldudex2 · « **Reply #527 on:** February 08, 2012, 11:13:48 PM »

It's be mirrored across both the x and the y-axis if you get what I'm saying.

Aaron · « **Reply #528 on:** February 08, 2012, 11:23:20 PM »

ok here is something I threw together quick with you king

Sorry if you wanted to be exclusively working on it but I had an idea. (I realize you want it sketched but this is just a digitalization of it.

Derek · « **Reply #529 on:** February 08, 2012, 11:24:47 PM »

NEW BACK DESIGN IDEA:

This is just an idea. It's expandable. i realize right now it's a one way back but I can change that if you guys like the idea.

Aaron · « **Reply #530 on:** February 08, 2012, 11:26:30 PM »

Quote from: Derek on February 08, 2012, 11:24:47 PM

NEW BACK DESIGN IDEA:

This is just an idea. It's expandable. i realize right now it's a one way back but I can change that if you guys like the idea.

That acctually looks pretty sweet! I think you should turn the bottom half of the D`s so it is a 2-way design.

loldudex2 · « **Reply #531 on:** February 08, 2012, 11:30:20 PM »

Quote from: Aaron on February 08, 2012, 11:23:20 PM

ok here is something I threw together quick with you king Sorry if you wanted to be exclusively working on it but I had an idea. (I realize you want it sketched but this is just a digitalization of it.

It looks good, but I think the legs might look weird when mirrored, but who knows. I will be trying all different things to see what looks best.

Aaron · « **Reply #532 on:** February 08, 2012, 11:31:53 PM »

Quote from: loldudex2 on February 08, 2012, 11:30:20 PM

Quote from: Aaron on February 08, 2012, 11:23:20 PM
ok here is something I threw together quick with you king Sorry if you wanted to be exclusively working on it but I had an idea. (I realize you want it sketched but this is just a digitalization of it.

It looks good, but I think the legs might look weird when mirrored, but who knows. I will be trying all different things to see what looks best.

Ya I just made it quick. anyway awesome designs you are making

dmbaggs · « **Reply #533 on:** February 08, 2012, 11:41:20 PM »

That back design looks really nice! If you could make it a non-one-way back it would look even better. So switch the D's and work on have the spades not all point down; try to switch the direction in the middle. It's a good start though

NathanCanadas · « **Reply #534 on:** February 09, 2012, 12:12:16 AM »

For the back design, I like it, but I think I actually preferred the other one better. If you decide to pick this one, maybe some of the spade symbol thingys could spell out discourse in red. Of course, I think this should be a 2 way design.
For the King, I really like it, and, not to bash on you, Aaron, but I prefer the version without the legs. I thin i would look really neat with it mirrored in 4 directions.
For the AoS, I think it should be done with our signatures, as originally planned.

Don Boyer · « **Reply #535 on:** February 09, 2012, 09:32:09 AM »

Quote from: Derek on February 08, 2012, 11:24:47 PM

NEW BACK DESIGN IDEA:

This is just an idea. It's expandable. i realize right now it's a one way back but I can change that if you guys like the idea.

If you reduce the number of spades per point to only four, or increase it to six, it would be easier to make a classy two-way design.

You can also consider including other suits, if they look good there.

If you make the points smaller, you can spell "DISCOURSE" vertically on each side edge, perhaps in a shade of deep red.

I have an idea for the Ace of Spades. Make the actual big pip as plain as possible. Write signatures all across the card. When printing them on a white background, make them black, and when printing them on the black spade, change that part of the signature to white. I think it would look really sweet. Can you envision what I'm thinking of?

loldudex2 · « **Reply #536 on:** February 09, 2012, 10:47:24 AM »

@Don Boyer

I get what you're saying. It'd be like an inverse of the black and white, right?

Don Boyer · « **Reply #537 on:** February 09, 2012, 11:56:10 AM »

Quote from: loldudex2 on February 09, 2012, 10:47:24 AM

@Don Boyer

I get what you're saying. It'd be like an inverse of the black and white, right?

Precisely. When writing in the background, the lines of the signatures are black on a white surface. When writing on the ace pip in the center, the lines of the signature are white on a black background. The lines will transition as signatures overlap and move from the white through the black and back again.

loldudex2 · « **Reply #538 on:** February 09, 2012, 01:31:28 PM »

I think it sounds cool, but it might be a little hard on the eyes. We will need to see a mockup first.

NathanCanadas · « **Reply #539 on:** February 09, 2012, 01:37:16 PM »

@Don This is a great idea, but I think a black ace of spades may be too classic. Maybe white on dark blue? Navy? It would be nice to just try that out.

Evan · « **Reply #540 on:** February 09, 2012, 04:37:20 PM »

Quote from: Derek on February 08, 2012, 11:24:47 PM

NEW BACK DESIGN IDEA:

This is just an idea. It's expandable. i realize right now it's a one way back but I can change that if you guys like the idea.

I think I'm in love with that design...

It's sooo awesome! But I think you should try it mirrored to see how it looks.

NathanCanadas · « **Reply #541 on:** February 09, 2012, 04:41:32 PM »

@Aaron - What happened to the kinda 3D version of the AoH? I liked it better

LOL

kensei777 · « **Reply #542 on:** February 09, 2012, 04:46:18 PM »

I have to admit, that back design is pretty sweet but I'm going to have to agree with Don here. If we're going to go with that design, you should work on the half line so we can have the D's both ways and reduce or add more spades to keep it even.

Another suggestion would be keep that layout and flip the other images, like an alternating pattern.

Derek · « **Reply #543 on:** February 09, 2012, 06:12:42 PM »

Thanks for the input everyone! i knew it would need to be tweaked and I have some great ideas. I'm going to try to make it only made of 4 pips. This will make it easy for a 2 way back.
QUESTION: If it's 4 pips, should i make it look like a plus sign or an 'X'? I'll also make it small enough so I can spell DISCOURSE down each side. I think that would be awesome :-* :-* :-*

loldudex2 · « **Reply #544 on:** February 09, 2012, 06:21:31 PM »

You should mak it look like an X.

kensei777 · « **Reply #545 on:** February 09, 2012, 06:43:09 PM »

Gotta go with the X

Derek · « **Reply #546 on:** February 09, 2012, 07:09:32 PM »

I didn't go with an X lol BUT i love it

loldudex2 · « **Reply #547 on:** February 09, 2012, 07:30:35 PM »

That looks amazing.

Lara Krystle "Lane" · « **Reply #548 on:** February 09, 2012, 07:33:28 PM »

That looks totally WICKED SICK! i <3 it!!! That back design is really starting to pull together! This is really really nice! I have no qualms about it.
lets see...

KEEP UP THE GREAT WORK!

RandyButterfield · « **Reply #549 on:** February 09, 2012, 07:37:49 PM »

Hey Derek,

I think the back looks great but the edges look like they need to be contained.
Also, what about throwing in a background color with a little Inner Glow and a subtle
stroke to beef it up a little?

I did a quick mockup on your lo res to illustrate what I'm referring to.

thanks, Randy

— I just noticed, if you do something like my mockup the pattern should probably extend a little
where there are current empty spots. Just a few more duplications on the sides, top and bottom would
do it!

Poll

What is your opinion regarding the extra card w/credits?

Author (Read 156615 times)