You are Here:
Olympus Relaunch

Author (Read 10540 times)

Re: Olympus Playing Cards Relaunch [KS]
« Reply #50 on: August 15, 2015, 07:50:34 PM »
 

Don Boyer

  • VP/Dir. Club Forum/DAC Chair, 52 Plus Joker
  • Administrator
  • Forum Sentinel
  • *
  • 19,172
    Posts
  • Reputation: 415
  • Pick a card, any card...no, not THAT card!

  • Facebook:
Thanks for the clarification Don. So the white would be considered the border you are talking about? Here is how it would look if it was thinner:

Looks better.  Reshape your corners to match the arc of the cut corners of the card - a ⅛" corner (about 3mm).  Notice that your corners are larger in terms of the size of the arc than the card edge corners, leaving a little extra white at the corners than on the border.
Card Illusionist, NYC Area
Playing Card Design & Development Consultant
Deck Tailoring: Custom Alterations for Magicians and Card Mechanics
Services for Hire - http://thedecktailor.com/
Pre-Made Decks for Sale - http://donboyermagic.com/
 

Re: Olympus Playing Cards Relaunch [KS]
« Reply #51 on: August 16, 2015, 01:04:01 PM »
 

Sburk49

  • 52 Plus Joker Member
  • Newcomer
  • *
  • 14
    Posts
  • Reputation: 0
The rework looks great!

I personally would like to see Gold Foil embossing on the Legends branding as a stretch goal.

Similar to the Bicycle Archangels deck if you wanna see what i mean.
 

Re: Olympus Playing Cards Relaunch [KS]
« Reply #52 on: August 16, 2015, 09:26:03 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
The rework looks great!

I personally would like to see Gold Foil embossing on the Legends branding as a stretch goal.

Similar to the Bicycle Archangels deck if you wanna see what i mean.

Ah yes, I have that deck and the embossing does look very nice. I'll look into it and see how much extra it would be.  Thanks for the idea.
 

Re: Olympus Playing Cards Relaunch [KS]
« Reply #53 on: August 17, 2015, 11:24:51 AM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Hi everyone. The cards are now live: https://www.kickstarter.com/projects/286203767/olympus-playing-cards

I want to thank everyone for their suggestions, help, and support.
Tom
 

Olympus Failed KS Project
« Reply #54 on: September 17, 2015, 07:40:27 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Hi guys. Unfortunately my Olympus playing card deck did not fund.
https://www.kickstarter.com/projects/286203767/olympus-playing-cards

I am looking for some advice for an eventual relaunch. I want to take a decent amount of time to get this right. I am thinking about going with traditional black/red. I may also customize all the aces. I spent a lot of time on the artwork and I would really like to see the cards get funded.  I am open to any thoughts you all have. Thanks.

Tom
 

Re: Olympus Failed KS Project
« Reply #55 on: September 17, 2015, 09:13:42 PM »
 

Rob Wright

  • 52 Plus Joker Member
  • Aficionado
  • *
  • 1,363
    Posts
  • Reputation: 98

  • Kickstarter:
tanderle, I merged your 2 topics together. It just helps keep the place tidy.

Last night I stayed up late playing poker with Tarot cards. I got a full house and four people died.

 Steven Wright
http://neverforgotten.storenvy.com
Facebook- Never Forgotten Project

My Playing Card DB
 

Re: Olympus Failed KS Project
« Reply #56 on: September 18, 2015, 02:15:56 AM »
 

Don Boyer

  • VP/Dir. Club Forum/DAC Chair, 52 Plus Joker
  • Administrator
  • Forum Sentinel
  • *
  • 19,172
    Posts
  • Reputation: 415
  • Pick a card, any card...no, not THAT card!

  • Facebook:
Hi guys. Unfortunately my Olympus playing card deck did not fund.
https://www.kickstarter.com/projects/286203767/olympus-playing-cards

I am looking for some advice for an eventual relaunch. I want to take a decent amount of time to get this right. I am thinking about going with traditional black/red. I may also customize all the aces. I spent a lot of time on the artwork and I would really like to see the cards get funded.  I am open to any thoughts you all have. Thanks.

Tom

Why did you go with Legends branding?

Where was the promotional campaign?  You announced the launch - and vanished into thin air!  With thirty or more decks running at any given time, you need to keep people aware that your project exists or they'll forget all about it and move on to the next deck.
Card Illusionist, NYC Area
Playing Card Design & Development Consultant
Deck Tailoring: Custom Alterations for Magicians and Card Mechanics
Services for Hire - http://thedecktailor.com/
Pre-Made Decks for Sale - http://donboyermagic.com/
 

Re: Olympus Failed KS Project
« Reply #57 on: September 18, 2015, 08:05:25 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Why did you go with Legends branding?

Where was the promotional campaign?  You announced the launch - and vanished into thin air!  With thirty or more decks running at any given time, you need to keep people aware that your project exists or they'll forget all about it and move on to the next deck.

I went with Legends because of the 1,000 print run (USPCC is 2,000) which lowered the goal.

You are totally right about being MIA. To be honest, I should've waited a little bit. Life got hectic as I bought a house and got married.  Between moving and planning a wedding, I really didn't have much time for promotion.  That was a big mistake on my part. I want to really take some time to fix some things and make this deck better.
 

Re: Olympus Failed KS Project
« Reply #58 on: September 18, 2015, 09:25:26 PM »
 

HankMan

  • 52 Plus Joker Member
  • Discourse Royalty
  • *
  • 453
    Posts
  • Reputation: 13
I went with Legends because of the 1,000 print run (USPCC is 2,000) which lowered the goal.

I think what Don means is that why do you use Legends brand on your deck. You could have use Olympus as the branding.

Back for more
 

Re: Olympus Failed KS Project
« Reply #59 on: September 19, 2015, 06:46:06 AM »
 

Don Boyer

  • VP/Dir. Club Forum/DAC Chair, 52 Plus Joker
  • Administrator
  • Forum Sentinel
  • *
  • 19,172
    Posts
  • Reputation: 415
  • Pick a card, any card...no, not THAT card!

  • Facebook:
I went with Legends because of the 1,000 print run (USPCC is 2,000) which lowered the goal.

I think what Don means is that why do you use Legends brand on your deck. You could have use Olympus as the branding.

And you'd be absolutely right, HankMan.  It's one thing to use the Bicycle brand, but I don't think the Legends brand carries quite the same cachet just yet...
Card Illusionist, NYC Area
Playing Card Design & Development Consultant
Deck Tailoring: Custom Alterations for Magicians and Card Mechanics
Services for Hire - http://thedecktailor.com/
Pre-Made Decks for Sale - http://donboyermagic.com/
 

Re: Olympus Failed KS Project
« Reply #60 on: September 20, 2015, 02:19:23 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Oh I see. Thanks for the insight.
 

Re: Olympus Failed KS Project
« Reply #61 on: October 24, 2015, 03:39:35 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
I am finally starting to work on my project again. Thoughts on these cards?
« Last Edit: October 24, 2015, 03:46:47 PM by tanderle »
 

Re: Olympus Failed KS Project
« Reply #62 on: October 24, 2015, 03:47:34 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Here are the cards below.
 

Re: Olympus Failed KS Project
« Reply #63 on: October 24, 2015, 11:39:00 PM »
 

Don Boyer

  • VP/Dir. Club Forum/DAC Chair, 52 Plus Joker
  • Administrator
  • Forum Sentinel
  • *
  • 19,172
    Posts
  • Reputation: 415
  • Pick a card, any card...no, not THAT card!

  • Facebook:
I am finally starting to work on my project again. Thoughts on these cards?

Market them better?  You've got to really shout loud to be heard over the 30-odd other projects for playing cards running at any given time on Kickstarter.  And not just to collectors - not one of the top ten deck projects would have made the money they did without an influx of backers from outside of the card collectors' community.
Card Illusionist, NYC Area
Playing Card Design & Development Consultant
Deck Tailoring: Custom Alterations for Magicians and Card Mechanics
Services for Hire - http://thedecktailor.com/
Pre-Made Decks for Sale - http://donboyermagic.com/
 

Re: Olympus Failed KS Project
« Reply #64 on: October 25, 2015, 12:48:09 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Yeah I completely dropped the ball with marketing last time. Here is the new and updated Dionysus.
 

Re: Olympus Failed KS Project
« Reply #65 on: October 31, 2015, 12:31:05 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
Take a look at the redesigned Aphrodite.
 

Re: Olympus Failed KS Project
« Reply #66 on: October 31, 2015, 11:53:19 PM »
 

Don Boyer

  • VP/Dir. Club Forum/DAC Chair, 52 Plus Joker
  • Administrator
  • Forum Sentinel
  • *
  • 19,172
    Posts
  • Reputation: 415
  • Pick a card, any card...no, not THAT card!

  • Facebook:
The art was pretty attractive last time as well - you just need to market them better.

Know any message boards for people into Greek history and myth?
Card Illusionist, NYC Area
Playing Card Design & Development Consultant
Deck Tailoring: Custom Alterations for Magicians and Card Mechanics
Services for Hire - http://thedecktailor.com/
Pre-Made Decks for Sale - http://donboyermagic.com/
 

Re: Olympus Failed KS Project
« Reply #67 on: November 01, 2015, 08:22:44 AM »
 

Paul Ruccio

  • 52 Plus Joker Member
  • Forum Regular
  • *
  • 122
    Posts
  • Reputation: 13
I agree with Don. You need to plan your marketing outside of the playing card community. I call this a "dual community concept." The big win will come from marketing to those who are interested in Greek mythology, history, and literature.

I don't want to say the playing card community is low hanging fruit but it has a better awareness of playing card projects. You still need to market the playing card community but increase your effort outside of the community and in the concept community (i.e., message boards, Facebook groups, partner with blogs or websites, etc.).
« Last Edit: November 01, 2015, 08:24:13 AM by Paul Ruccio »
Paul Ruccio
Jetsetter Playing Cards
www.jetsetterplayingcards.com
- - - - -
High-class products and playing cards for the aviation, travel, and playing card enthusiasts around the globe.
 

Re: Olympus Failed KS Project
« Reply #68 on: November 01, 2015, 09:08:11 AM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
The art was pretty attractive last time as well - you just need to market them better.

Know any message boards for people into Greek history and myth?

I was happy with the art last time but they look much better now in my opinion.

I agree with Don. You need to plan your marketing outside of the playing card community. I call this a "dual community concept." The big win will come from marketing to those who are interested in Greek mythology, history, and literature.

I don't want to say the playing card community is low hanging fruit but it has a better awareness of playing card projects. You still need to market the playing card community but increase your effort outside of the community and in the concept community (i.e., message boards, Facebook groups, partner with blogs or websites, etc.).

Totally agree with you and Don. I admit that I dropped the ball last time but I plan on heavily marketing this time around.
 

Re: Olympus Failed KS Project
« Reply #69 on: November 11, 2015, 10:15:54 AM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
I officially relaunched. Thanks for the advice along the way.
https://www.kickstarter.com/projects/286203767/olympus-playing-cards-deck

 

Re: Olympus Relaunch
« Reply #70 on: November 22, 2015, 05:11:59 PM »
 

tanderle

  • Junior Member
  • *
  • 32
    Posts
  • Reputation: 0
I am having some black Friday pre-sales. Don't miss out on reduced prices. Limited quantities!

$44 for Four (4) Olympus Decks
FREE SHIPPING within United States

$60 for Six (6) Olympus Decks
FREE SHIPPING within United States